A slate roof typically costs between $25,000 and $75,000 for a standard single-family home in the U.S. In 2026, most homeowners pay $15 to $30 per square foot installed, depending on the slate type and roof complexity.
However, if your house has steep pitches, complex turrets, or historical masonry that requires more time on a scaffold, the cost of a slate roof will be much higher. You should also expect to pay more if you choose premium “hard slate” or require structural reinforcement to handle the extra weight.
If you’re planning on getting a slate roof, this guide will help you set a realistic budget. Below, we discussed slate roof prices by type, factors that affect its cost, labor fees, and how it compares to other roofing material prices. By the end, we also answered some slate roofing questions we often get from our clients.
Quick summary: How much does a slate roof cost per square foot?
$15,000 – $75,000+
- The national average cost to install a slate roof is $15,000 to $70,000 for a typical U.S. single-family home.
- Natural slate roofing costs $15 to $30 per square foot, while synthetic slate roofing ranges from $8 to $15 per square foot installed.
- Steep slopes, complex layouts, and structural reinforcement can increase total slate roof cost by 20% to 40%.
- High-cost regions often charge 15% to 30% more than the national average due to the scarcity of certified slate masters.
Average slate roof cost range nationwide
A standard natural slate roofing cost typically ranges from $20,000 to $60,000 for a full installation on a typical U.S. home. For most professional projects in 2026, you can expect to pay between $15 and $30 per square foot for material and labor combined.
While these are the average ranges, premium high-end installations involving rare stone colors or complex historical details can exceed $100,000.
Estimated total cost by house size
The largest factor in your estimate is the square footage of the roof deck, which is usually about 20% larger than the home’s interior footprint. For a mid-sized 2,000-square-foot roof, a synthetic slate roofing cost averages between $18,000 and $24,000.
If you choose natural slate for that same 2,000-square-foot area, your slate roof cost will be in the $40,000 to $70,000 range.
Here’s a comparison table of slate roof costs based on home size and total roof size:
| Home size | Est. roof size | Average slate roof cost per sq. ft.(installed) | Total slate roof cost installed |
| 1,000 sq. ft. | 1,200 sq. ft. | $10 – $30 | $12,000 – $36,000 |
| 1,500 sq. ft. | 1,800 sq. ft. | $10 – $30 | $18,000 – $54,000 |
| 2,000 sq. ft. | 2,400 sq. ft. | $10 – $30 | $24,000 – $72,000 |
| 2,500 sq. ft. | 3,000 sq. ft. | $10 – $30 | $30,000 – $90,000 |
| 3,000 sq. ft. | 3,600 sq. ft. | $10 – $30 | $36,000 – $108,000 |
Source: The pricing data in this guide is based from current 2026 market average from EcoWatch, This Old House, Fixr, and Modernize.
Why slate roofing costs more than most materials
Natural slate is the most expensive roofing material in the U.S. since it’s a natural metamorphic stone. Unlike factory-made asphalt shingles, this stone has to be quarried, hand-split, and custom-trimmed by hand.
Aside from the raw stone itself, slate roofing materials weigh much more than standard asphalt, which requires a structural engineer and frame reinforcement just to support the load.
Labor in slate installation is also much more intensive than a standard roof job. Installers can’t walk on slate without specialized gear, and every tile has to be hand-nailed with copper fasteners. This means installation typically takes 3 to 4 times longer than a standard shingle roof.
Here’s why the slate roof costs more than other roofing materials:
- Specialized craftsmanship. Labor makes up 50% to 60% of your total slate installation cost because it requires master installers trained to handle brittle stone.
- Heavy-duty hardware. To match the stone’s 100-year lifespan, you have to use high-cost copper or stainless steel for all the nails and flashing.
- Material rarity. High-quality hard slate only comes from specific regions like Vermont or Virginia, which drives up freight and shipping costs.
- Structural integrity. Since natural stone adds 800 to 1,500 pounds per 100 square feet of roof surface, your home might need $1,000 to $10,000 in structural bracing alone.
Slate roof cost by slate type (natural vs synthetic vs hybrid)
Slate roofing materials come in 3 major types: natural, synthetic, and hybrid. Each of them has varying material costs and labor fees, which will directly impact the final cost of your roofing project.
Here’s a cost comparison table between natural slate, synthetic slate, and hybrid slate roofing:
| Slate Type | Installed Cost per Square Foot | Typical Total Cost | Expected Lifespan | Who It’s Best For |
| Natural slate | $15–$30 | $30,000 – $75,000+ | 75–150+ years | Long-term owners, historic or premium homes |
| Synthetic slate | $8–$15 | $15,000 – $35,000 | 40–50 years | Budget-focused homeowners wanting slate look |
| Hybrid / composite slate | $10–$20 | $20,000 – $55,000 | 50–75 years | Balanced cost and durability needs |
Source: Pricing data compiled from HomeAdvisor, Angi, Fixr, This Old House, and manufacturer cost guidance.
Natural slate roof cost and lifespan
Natural slate roof costs $10 to $30 per square foot, or around $20,000 to $60,000 for a 2,000 sq. ft. house. This genuine quarried stone is usually sourced from regions like Vermont or Virginia.
Natural slate is a true “lifetime” material that can last between 75 and 200 years. The stone rarely fails—the roof only fails if your structure or installation is wrong.
Natural slate is real stone pulled from a quarry and installed one piece at a time. It’s the most expensive option, but it’s also the benchmark for longevity if you want a roof that outlasts your house itself.
However, keep in mind that, real slate is extremely heavy—often weighing 800 to 1,500 pounds per square—so you may need to pay for structural reinforcement to keep your roof from sagging.
Pros
- Individual slates can be replaced without large tear-offs
- Naturally resists UV damage, rot, and temperature swings
- Maintains strong resale and historic property value
Cons
- Repairs are costly if matching slate isn’t available
- Color and thickness matching can be difficult over time
- Insurance may require proof of structural capacity
Synthetic slate roof cost and tradeoffs
Synthetic slate roof costs $9 to $15 per square foot, or around $18,000 to $30,000 for a 2,000 sq. ft. house. This type of slate is a manufactured alternative made from engineered polymers or recycled rubber from brands like DaVinci or EcoStar.
Also, synthetic slate is popular for standard homes because it’s lightweight enough to install without structural modifications. While it mimics the look of stone perfectly, it has a shorter lifespan of 40 to 50 years.
Overall, synthetic slate is designed to look like stone without the heavy weight and complicated installation. This is why installation of synthetic slate is closer to that of standard roofs, which lowers labor costs and makes it easier for you to find qualified installers.
Pros
- More forgiving during installation, reducing breakage waste
- Compatible with a wider range of roof designs and flashing systems
- Easier to integrate with modern ventilation and ridge systems
Cons
- Performance varies significantly between manufacturers
- Can show surface wear sooner in high-heat or high-UV regions
When hybrid or composite slate is worth the money
Hybrid slate roof costs $9 to $18 per square foot, or around $18,000 to $36,000 for a 2,000 sq. ft. house. These hybrid slate shingles use a core of synthetic material with a real natural slate overlay.
In general, a hybrid slate roof is worth the money if you want the authentic texture of real stone but your home can’t handle the weight of full natural tiles. It offers more durability than pure synthetic options, with a typical lifespan of 50 to 100 years.
Pros:
- Better impact resistance than most synthetic-only products
- More stable sizing reduces alignment issues on large roof planes
- Often supported by certified installer programs
Cons
- Fewer long-term performance case studies than natural slate
- Replacement pieces may be manufacturer-specific
Natural slate vs. synthetic slate: A cost-to-value comparison
When comparing natural slate vs synthetic slate, real stone often seems like a major upfront expense. However, the true long-term roofing value is found by looking at how many times you will have to replace the roof over the next century.
While a synthetic roof is a high-performing 50-year product, natural slate is a generational investment that can lower your home’s lifetime roofing cost because you only pay for it once.
Here’s a quick comparison table of natural slate vs. synthetic slate in terms of long-term cost:
Natural slate vs. synthetic slate: cost-to-value comparison table
| Cost Consideration | Natural Slate Roofing | Synthetic Slate Roofing |
| Installed cost per sq. ft. | $15–$30 due to stone material and skilled labor | $8–$15 with faster installation |
| Typical total project cost | $30,000–$75,000+ on most U.S. homes | $15,000–$35,000 for similar roof sizes |
| Expected service life | 75–150+ years when installed correctly | 40–50 years before replacement |
| Replacements over 100 years | Usually none | One full replacement, sometimes two |
| Total cost over long ownership | Lower spread across decades despite high upfront price | Higher once replacement and labor are included |
| Ongoing maintenance costs | Low and infrequent | Moderate as materials age |
| Repair cost pattern | Fewer repairs, but higher cost per fix | More frequent repairs at lower cost |
| Upfront structural costs | May require framing reinforcement | Rarely requires structural changes |
| Insurance considerations | Often viewed favorably due to fire resistance | Depends on product and carrier |
| Impact on resale value | Adds value on historic and high-end homes | Primarily cosmetic value |
Why natural slate is a 100-year investment
Installing a natural slate roof is like buying a “lifetime” asset for your home. It’s the only material with a proven slate roof lifespan that routinely exceeds a century. Because it is a natural stone, it is 100% non-combustible and immune to UV degradation, meaning it won’t melt, warp, or fade over time.
From a roofing return-on-investment perspective, natural slate eliminates the massive cost of future roof replacements. Most home buyers find that the high initial price is offset by a 10% increase in property value and the fact that the roof will likely never need to be stripped again.
The upfront savings of synthetic slate (DaVinci, Brava, and EcoStar)
The primary financial “win” for synthetic slate roofing cost is the avoidance of structural reinforcement. This saves homeowners between $3,000 and $12,000 on top of the lower material price.
Brands like DaVinci and Brava also offer Class 4 impact ratings, which is the highest protection against hail. In many regions, this rating triggers an annual insurance premium discount of 20% or more, allowing the roof to partially pay for itself over 5 to 10 years. It remains the most cost-effective way to get high-end curb appeal on a standard residential frame.
What actually drives the cost of a slate roof
While slate roofing material itself is expensive, the final estimate you receive is heavily influenced by several slate roof installation variables that can double or triple the final price. Understanding these slate roof cost factors helps you identify why one contractor’s quote might be $20,000 while another estimate for the same house is $60,000.
Material quality and slate thickness
Slate isn’t a single-grade material. For example, standard 1/4-inch tiles are the most common, but costs rise significantly for “Architectural” or “Premium” grades that are thicker and more durable.
Thicker, denser slate costs more to buy, ship, and install, but it also lasts longer and resists breakage better. If you choose thinner or lower-grade slate, you may save upfront, but you’ll see more waste during installation and a shorter service life. Contractors price that risk into your quote because broken slate can’t be reused.
How much it moves the price: Higher-grade or thicker slate can increase material costs by 20% to 40%.
Roof size, pitch, and structural complexity
The roof pitch and complexity are often more significant than the actual square footage. A steep roof requires specialized scaffolding and fall-protection equipment, which slows down the crew’s progress.
If your roof has multiple gables, valleys, or dormers, the “waste factor” increases significantly. Installers must hand-trim more individual slates to fit the angles, requiring more time and more material. A “cut-up” roof with many planes is much more labor-intensive than a simple gable or hip roof.
How much it moves the price: Steep pitches or high complexity can increase the slate roofing labor cost by 30% to 50%.
Structural reinforcement for heavy stone (often hidden cost)
The structural reinforcement cost is a major “hidden” expense when switching to natural slate. Because natural slate weighs 800 to 1,500 pounds per square, most standard homes require a structural engineer to inspect the rafters and load-bearing walls.
If your home was originally built for asphalt shingles, joist reinforcement or decking upgrades may be required to meet these load requirements.
How much it moves the price: Structural work can add $3,000–$15,000+, depending on your roof framing and local code requirements.
Labor costs and installer specialization
Slate installation isn’t interchangeable with standard roofing labor. Experienced slate installers work more slowly by design, using specialized tools and techniques to avoid cracking stone. Because fewer contractors are qualified to do this work, labor rates are higher in many areas.
For most projects, slate roofing labor cost becomes the largest line item, simply because mistakes are expensive and difficult to fix.
How much it moves the price: Skilled slate labor can account for 40% to 50% of your total roofing project cost.
Tear-off, disposal, and underlayment costs
If you’re replacing existing roof layers, tear-off adds labor, disposal fees, and equipment costs. Slate also requires upgraded underlayment and ice-and-water protection, especially if you live in a colder climate.
Since the slate itself will last 100 years, the underlayment must be durable enough to protect the house for decades, which is a significant upgrade over standard felt paper.
How much it moves the price: Tear-off and prep work typically add $2–$6 per square foot.
Material grades and origins: Vermont, Pennsylvania, and imported slate
Where your slate roofing comes from affects price, durability, and color consistency. Domestic Vermont slate is highly desirable for its quality and varies in color, while Pennsylvania slate is often softer and primarily used for repairs since many original quarries have closed.
On the other hand, imported slate from Spain or Brazil can be cheaper up front, but you often pay significantly more in shipping fees and may see greater variation in stone hardness. High freight costs for heavy stone can also eat up your savings from cheaper material prices.
How much it moves the price: Premium domestic slate can increase pricing by 10% to 25%, while imported slate may save 10% to 15% on materials, but can increase shipping costs.
Cost variations in the Northeast vs. the Sunbelt
In the Northeast, where slate quarries are more accessible and specialized labor is common, you may find more competitive pricing.
In the Sunbelt or West Coast, you will pay a premium for freight and may have to pay “traveling” fees for a specialized crew to come from out of state. The rarity of local slate specialists in these regions often drives up the baseline labor rate.
Climate also affects fastening methods, underlayment requirements, and roof inspections—all of which influence what you’re quoted.
How much it moves the price: Regional differences can shift your total slate roof cost by 10% to 30%.
Labor and installation costs: Why specialized slate masons charge more
The slate roofing labor cost makes up the largest portion of your quote because this isn’t a high-speed assembly job. While a standard crew might finish an entire asphalt roof in a day, a slate mason installation is a meticulous process that usually covers only one or two “squares” (100 sq. ft.) per day.
Every piece of slate is hand-sorted and “rung”—tapped with a hammer to ensure a clear sound, which confirms the stone is solid and free of internal cracks.
Here’s what you need to know about labor and installation costs for slate roofs:
The importance of copper flashing and specialized fasteners
A slate roofing contractor should never use aluminum or galvanized steel flashing on a stone roof. Those metals typically rust out within 20 to 30 years, while the slate itself is still in its prime. If the flashing fails, you are forced to dismantle a perfectly good roof just to replace the metal fasteners underneath.
This is why specialty roofing labor focuses on custom-fabricated copper. The copper flashing cost is high, but it is the only material that matches the 100-year lifespan of the slate. We also use copper or stainless steel nails to prevent “nail sickness”—a common failure where standard steel nails rust away, causing the slates to slide off your roof one by one.
Overall, copper and specialized fasteners typically add 15% to 25% to the total roofing cost, but they help ensure the roof doesn’t require a major overhaul in a few decades.
Slate roof cost compared to other roofing materials
Comparing slate to other roofing options only by upfront price doesn’t reflect how roofs actually perform over time. Below, we have a roofing material comparison chart to help you assess their costs, performance, and long-term value for your home:
Roofing material cost comparison over time
| Roofing Material | Installed Cost per Sq. Ft. | Typical Lifespan | Replacements over 100 Years | Long-term Cost Outlook |
| Asphalt shingles (3-tab) | $4–$6 | 15–20 years | 4–5 | High due to frequent replacement |
| Architectural asphalt shingles | $5–$8 | 20–30 years | 3–4 | High over long ownership |
| Metal roofing (standing seam) | $9–$16 | 40–60 years | 1–2 | Moderate over time |
| Wood shakes | $8–$14 | 25–35 years | 2–3 | High maintenance and replacement cost |
| Clay tile | $12–$25 | 50–75 years | 1–2 | Moderate to high depending on repairs |
| Concrete tile | $10–$20 | 40–60 years | 1–2 | Moderate over long ownership |
| Synthetic slate | $8–$15 | 40–50 years | 1–2 | Moderate due to eventual replacement |
| Hybrid / composite slate | $10–$20 | 50–75 years | 1 | Moderate to low |
| Natural slate | $15–$30 | 75–150+ years | 0 | Lowest cost per year of service |
Is a slate roof worth the cost for your home?
Whether slate is “worth it” depends on how long you plan to own the home, how the house is built, and what you expect from the roof over decades. Below is a quick guide to help you decide if premium roofing materials like slate are the right choice for your home.
Home types that benefit most from slate roofing
While the initial cost is high, the slate roof return on investment is unmatched for owners prioritizing long-term durability. For a “forever home,” natural slate ends the replacement cycle, becoming the most cost-effective choice over 50 years.
In general, slate roofs offer the most value for the following property types:
- Historic homes needing natural slate to preserve architectural integrity and home resale value roofing.
- Luxury estates using slate as a prestige material to signal quality and marketability.
- Homes in wildfire zones using slate’s Class A fire rating to cut insurance and slate roofs costs.
- Properties in high-wind areas where heavy stone prevents hurricane-force winds from peeling tiles.
- Sustainable builds prioritizing natural, recyclable products over petroleum-based shingles.
- Coastal properties where natural slate resists the salt spray and rot that destroy metal.
- Overbuilt homes with rafters strong enough to support stone without added structural reinforcement cost.
When slate roofing does not make financial sense
Slate isn’t a bad roof—but it can be the wrong roof for certain homes and ownership situations. The cost only pays off when you have enough time, structure, and resale alignment to absorb it. If those factors aren’t in place, slate’s durability doesn’t translate into real financial value for you.
Slate roofing usually doesn’t make financial sense if:
- You plan to sell within 10 to 15 years, since most buyers won’t recoup the full upfront cost.
- Your home requires major structural reinforcement, which adds thousands before slate is even installed.
- The property is a rental or short-term investment, where durability doesn’t offset entry cost.
- You’re prioritizing the lowest upfront price, not the lifetime roofing cost.
- Local contractors lack slate experience, increasing labor risk and long-term repair costs.
- The home’s value doesn’t justify a premium roof, limiting resale return.
Impact of slate roofing on home resale value and insurance premiums
According to Angi, a brand-new slate roof has an average ROI of 60%. Market data also suggests that a new slate roof can increase home resale value by 5% to 10%. Unlike asphalt, which buyers view as a ticking clock of future debt, slate is marketed as a permanent asset that can actually speed up a sale.
Industry insurance data shows that homes with durable roofing materials like slate often have slightly lower annual premiums than homes with standard asphalt roofs.
Maintenance and repair costs to budget for over time
Slate roofs are durable, but they aren’t maintenance-free. Ongoing slate roof maintenance costs are modest compared to replacement, but ignoring routine care can lead to minor problems that turn into expensive repairs. Budgeting for preventive roof maintenance ensures that minor issues, such as a single cracked tile or a backed-up gutter, do not escalate into structural water damage.
Common slate roof repairs and their average price tags
In general, homeowners should expect slate roof repair costs to range from $500 to $2,500 per repair, depending on access, roof height, and the type of work required. Costs remain manageable when issues are addressed early, but they rise sharply when repairs are delayed.
Here’s a quick look at common slate roof repair costs:
| Repair Type | Description | Average Cost |
| Individual slates | Replacing cracked or broken slates caused by impact or foot traffic. | $300 – $800 |
| Metal flashings | Repairing or replacing copper flashing at chimneys, valleys, or dormers. | $1,500 – $3,500 |
| Slipped slates | Re-hanging slates that have shifted due to fastener failure. | $400 – $900 |
| Gutter maintenance | Clearing debris to prevent ice dams and water backup onto slate. | $250 – $600 |
| Snow guards | Re-attaching or replacing loose guards to protect walkways below. | $300 – $700 |
| Step flashing repairs | Fixing flashing where slate meets walls or roof transitions. | $750 – $2,000 |
| Ridge slate repairs | Re-securing or re-bedding loose ridge slates. | $900 – $2,500 |
| Vent or skylight detailing | Repairing slate and flashing around roof penetrations. | $700 – $2,200 |
How annual inspections prevent 5-figure replacement costs
Annual roof inspections are one of the most effective forms of preventive roof maintenance for slate. A licensed roofer like PACC Solutions can spot cracked slates, early flashing wear, or movement before water reaches the structure.
By identifying a loose slate early, you pay a modest slate roof repair cost today instead of a large interior renovation bill later. These check-ups are especially critical after hailstorms or high-wind events to ensure the “headlap”—the overlap that keeps the system watertight—remains secure.
How to reduce slate roof costs without cutting corners
Achieving a lower slate roofing budget does not mean opting for inferior stone or skipping essential waterproofing. Instead, cost-efficiency comes from smart project management and material selection.
Below, we shared how you can reduce slate roof cost without compromising the system’s 100-year potential.
1. Choosing the right slate grade for your budget
Not every home requires “Premium” or “Architectural” grade slate. You can find significant savings by selecting a “Standard” 1/4-inch thickness, which offers the same mineral durability as thicker tiles but at a lower price point and reduced shipping weight.
Another option is choosing “Semi-Weathering” slate. These stones change color slightly after exposure to the elements, making them more affordable than “Permanent” color grades that remain uniform for decades.
2. When partial replacement or repair is viable
Slate roofs don’t always fail all at once. In many cases, sections of the roof are still performing well while isolated areas need attention. When the underlying structure is sound, partial slate roof replacement or targeted repairs can extend the roof’s life without the cost of a full tear-off.
3. Timing your slate roof installation strategically
Slate work is labor-intensive and seasonal in many regions. If you schedule your installation for the “shoulder seasons”—typically late winter or early spring—you may find more flexibility in pricing as crews look to fill their calendars.
Additionally, booking months in advance allows for “flatbed” shipping of your materials rather than “hot-shot” delivery, which significantly reduces freight costs.
How to find and vet a qualified slate roofing contractor in your area
Labor quality has a bigger impact on slate roof cost than almost any material choice. Hiring a qualified slate roofer reduces waste, prevents installation errors, and protects the roof’s lifespan.
Look for contractors with documented slate experience, a portfolio of completed projects, and a clear explanation of how they detail flashing, fasteners, and repairs. A knowledgeable contractor will help you control costs through proper planning—not by cutting corners that lead to expensive fixes later.
Frequently asked questions about slate roof cost
Does homeowners’ insurance cover slate roof replacement?
Homeowners’ insurance usually covers slate roof replacement only when damage is caused by a covered event, such as hail, wind, or falling debris. Normal wear, aging, or installation defects are typically excluded.
Also, coverage depends on your policy type—replacement cost value policies are more favorable than actual cash value. Insurers may require documentation showing proper installation and structural support before approving full slate replacement.
Does slate roofing require special maintenance costs?
Yes, slate requires specialized maintenance that differs from standard asphalt roofs. Expect to pay for a specialist mason who understands how to navigate the roof using hook ladders without breaking the brittle stone. These routine check-ups prevent the need for expensive structural repairs caused by long-term moisture penetration.
Is slate roofing cheaper on historic homes?
Slate is rarely cheaper on historic homes; in fact, it often costs more due to preservation requirements. Historic commissions may mandate specific quarry origins, “semi-weathering” colors, or custom copper work to maintain architectural accuracy.
While you might save on material if the original slate is salvaged and reinstalled, the specialized labor required to carefully remove and sort century-old stone often offsets any potential material savings.
How much does it cost to replace a few broken slates?
Replacing a small number of broken slates typically costs $300 to $800, depending on roof access, pitch, and slate availability. If the repair involves flashing work or difficult access, costs can be higher. Addressing broken slates early keeps repairs localized and prevents moisture damage, which is what drives slate roof repair costs into the thousands.
What is the price difference between “reclaimed” slate and new slate shingles?
Reclaimed slate often costs 10% to 30% less than new slate shingles, depending on availability and condition. However, reclaimed slate may increase labor costs due to sorting, sizing, and matching. It’s commonly used for repairs or historic restorations where color and thickness consistency matter more than material age. Savings depend on how well the reclaimed slate matches your existing roof.
Do I need to pay for a structural engineering report before installing slate on an older home?
If you are switching from a lighter material like asphalt to natural slate, a structural engineering report is essential and typically costs $500 to $1,500+. Many contractors also recommend it for older homes that weren’t originally designed for slate.
While optional in some cases, a structural engineering inspection can prevent costly surprises and delays, especially when reinforcement costs would significantly affect the total slate roof budget.
How much more does a “graduated” slate roof cost compared to a standard pattern?
A graduated slate roof typically costs 10% to 20% more than a standard pattern. Graduated installations use thicker, heavier slates at the eaves and thinner slates near the ridge, which increases material cost and labor time. The benefit is improved durability and a traditional appearance, especially on historic or high-end homes, where long-term performance and aesthetics matter.
Does the color of the slate (e.g., Unfading Green vs. Mottled Purple) impact the price?
Yes, slate color can affect pricing. “Semi-weathering” slates, which change to buff or brown over time, are usually the most affordable. “Unfading” colors like Unfading Black or Unfading Green command a 15% to 25% premium because they remain uniform for decades.
Rare colors, such as Mottled Purple or Red slate from specific New York or Vermont quarries, are the most expensive.
Interested in a free roof estimate? Contact us at PACC Solutions
If you’re planning a new roof in Chicago, IL, contact us at PACC Solutions for a free quote. For 14+ years, our licensed and insured roofing company has been providing long-lasting roofing solutions in Chicagoland. We also provide public adjuster services with 95% approval rate to maximize your insurance coverage for any roof repair or replacement.
PACC Solutions is an A+ BBB-rated roofing company in Chicago, an NRCA member, and a recipient of the 2023 Angi Super Service Award.
Contact us today to request a free roofing estimate!
